Table of Contents
Advertisement
Recording video clips
Your camera allows you to record video clips without sound.
1. Slide
2. In the
Shooting Mode, then press
3. In the
Video, press
disappears.
4. Frame the subject in the Image Display or the viewfinder.
5. Press the Shutter button all the way down and release to
begin recording video.
6. To stop recording video, press and release the Shutter button again.
Instant Review
After you have taken a picture or recorded a video clip, the camera displays it briefly in
Instant Review. If you want to delete the image or video clip, press
Image from the
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene expands to show what the camera
will capture, and the MP value decreases to indicate the resolution at which the scene
will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image
Display is appropriate for the size at which you want to print the captured image. For MP
values and their recommended print sizes, see Image Quality under
Capture Menu" on page
TIP:
The more you zoom in on the subject of your picture, the more small movements
of the camera are magnified (this is called camera shake). To reduce potential blur
caused by these movements, hold the camera still, add more light to the scene, or
steady the camera by holding it closer to your body or against a steady object, or by
setting it on a tripod or stable surface.
To use digital zoom:
1. Slide
2. Press and hold
press
NOTE:
Digital zoom is not available when recording video clips.
to
, then press
Picture Capture Menu, use
Shooting Mode menu, use
, then hold down
Delete menu, then press
11.
to
.
until the image you want fills the yellow frame. If you zoom too far,
.
.
to highlight
.
to highlight
until the menu
.
Recording video clips
, select This
"Using the Picture
9
Hide quick links:
Advertisement
Table of Contents
