Nikon COOLPIX S6800 Reference Manual page 223

Problem
Cannot rotate image.
Images are not displayed on
TV.
Nikon Transfer 2 does not
start when the camera is
connected to a computer.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
Cause/Solution
This camera cannot rotate images captured with
another make or model of digital camera.
• TV settings is not correctly set in the setup menu.
• Both HDMI and USB cables are connected
simultaneously.
• The memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and it
may be impossible to print images when Auto is
selected for Charge by computer in the setup
menu. Set Charge by computer to Off and
reconnect the camera to the printer.
A
–
78, E84
83, 86,
E22,
E25
15
20
20
83, 86
–
89
78, E85
F15