Recharging The Battery - Canon EOS 30D Instruction Manual

Hewlett-packard digital camera instruction manual
Hide thumbs Also See for EOS 30D:
Table of Contents

Advertisement

Recharging the Battery

Battery pack slot index
CG-580
CB-5L
Recharge Level
0-50%
Blinks once per second
50-75%
Blinks twice per second
Blinks three times
75-90%
90% or higher
22
1
2
3
Red lamp
per second
Lights on
Remove the cover.
When you remove the battery from
the camera, be sure to reattach the
cover to protect against short circuit.
Attach the battery.
Align the battery front edge with the <–>
mark (battery pack slot index) on the
battery charger. While pressing down the
battery, slide it in the direction of the arrow.
To detach the battery, follow the
above procedure in reverse.
For CG-580
Flip out the prongs and recharge
the battery.
As shown by the arrow, flip out the
battery charger's prongs.
Insert the prongs into a power outlet.
For CB-5L
Connect the power cord and
recharge the battery.
Connect the power cord to the charger
and insert the plug into the power outlet.
Recharging starts automatically and
the red lamp starts blinking.
The recharging time for a completely
exhausted battery is as follows:
BP-511A and BP-514: Approx. 100 min.
BP-511 and BP-512: Approx. 90 min.
The numbers and markings on the
battery charger correspond to the
table on the left.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents