SOYO SY-7IWA-F User Manual page 35

Hardware Installation
3. Universal Serial Bus USB1/USB2
This Motherboard provides two USB ports for your additional devices.
Plug the USB device jack into the available USB connector USB1 or
USB2.
- Standard device drivers come with the Win98 for commonly used
USB devices.
- With Win95, use the flow UHCI specifications. To use USB devices
under Win95, usually you have to install the device driver comes
with the USB device you have purchased.
4. Flat Panel Connector
Plug the flat panel cable into this 20 pin mini-D ribbon type receptacle.
This motherboard supports industry standard DFP (Digital Flat Panel)
interface by using the TMDS (Transmission Minimized Differential
Signaling) technology. It is compliant with the DVI (Digital Visual
Interface) 1.0 specifications and is backwards compliant with VESA P&D,
EDID and DDC standards.
5. VGA monitor connector
Plug the monitor cable into the 15-pin female VGA connector located at
the real panel of the motherboard.
6. Onboard Joystick port/audio
This Motherboard provides Joystick port and audio.
- Attach the joystick cable to the 15-pin JOYSTICK port at the rear
panel of you motherboard.
- This Motherboard features three built-in audio-stereo ports (labeled
line-in, line-out, and mic jack) convenient to directly plug-in all your
external audio devices.
31
SY-7IWA-F