HP EliteBook 725 G2 Quickspecs page 31

QuickSpecs
Technical Specifications
SATA 6 Gb/s 256 GB*, 2.5-
inch SATA SED Solid State
Drive
* For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 16 GB (for
Windows 7) and 30 GB (for Windows 8.1) of system disk is reserved for the system recovery software.
** * FIPS-certified, hardware-based AES-256 encryption image.
S
ECURITY
HP Fingerprint Reader
(optional)
Smart Card Reader
Performance
Logical Blocks
Operating Temperature
Features
Drive Weight
Capacity
Height
Width
Interface
Performance
Logical Blocks
Operating Temperature
Features
Mobile Voltage Operation 3.0V-3.6V
Operating Temperature
Current Consumption
Image
Low Latency Wait for
Finger
Capture Rate
ESD Resistance
Detection Matrix
Smart card standard
Dimensions (L x W x H)
HP Confidential World Wide – June 2014
Maximum Sequential
Read
Up to 550 MB/s
351,651,888
32° to 158°F (0° to 70°C) [case temp]
ATA Security; ATA-8, SATA 3.0; DIPM; TRIM, TCG Opal Compliant
Up to 73 Grams
256 GB
0.276 in (7 mm)
2.76 in (70 mm)
SATA 3 (6 Gb/s)
Maximum Sequential
Read
Up to 460 MB/s
500,118,192
32° to 158°F (0° to 70°C) [case temp]
ATA Security; ATA-8 compliant; SATA 3.0; DIPM; TRIM, TCG Opal Compliant
14° – 167°F (-10° – 75°C)
36 mA peak
950 uA
6000 lines/sec
IEC 61000-4-2 4B (±15KV)
200*1 (plus another secondary line)
508 dpi
12*3 mm sensor area
PC/SC 2.0 for Windows smart card standard
0.41x 0.08 x 0.32 in (10.5 x 2 x 8.2 mm)
HP EliteBook 725 G2 Notebook PC
HP EliteBook 745 G2 Notebook PC
HP EliteBook 755 G2 Notebook PC
Maximum Sequential Write
Up to 520 MB/s
Maximum Sequential Write
Up to 260 MB/s
HP Confidential
Page 31