Step 5 - Mount The Speaker Into The Ceiling; Step 6 - Connect An Auxilary Support Line - Electro-Voice EVID C12.2 User Manual

Step 5: Mount the Speaker Into the Ceiling (Figure 11)
Push the speaker into the ceiling hole until the front baffle rim is flush with the ceiling.
Tighten the mounting tabs by turning the screw clockwise until the speaker is secure.
Please note that the first clockwise quarter turn rotates the attachment tabs outward.
The remaining turns tighten the tabs down onto the back of the ceiling surface (see
Figure 12).
Installation Note:
See Page 3 for possible installation methods. If 3/8" threaded rod is to be used in a
ceiling tile installation, the threaded rod must be installed to the threaded rigging point
before installing into the ceiling.
Figure 11: Mount Speaker into
Ceiling
Step 6: Connect an Safety
Support Line (Figure 13)
Note the support ring on the back of the
speaker. The ring allows for connection to
an independent and secure anchor point.
Construction codes often require the use
of this secondary support point.
8
EVID TM C12.2 Ceiling Speaker Installation and Operations Manual
Installation Note: Mounting
Tabs
For each attachment screw, first turn
one half turn counterclockwise to
release the counting tab from its guide.
Figure 12: Tighten Mounting Tabs
Figure 13: Attach Safety Support
Line