Maintenance; General; Maintenance Schedule - Husqvarna K970 II Rescue Operator's Manual

General

WARNING! The user must only carry out the maintenance and service work described in this
!
Operator's Manual. More extensive work must be carried out by an authorized service workshop.
The engine should be switched off, and the stop switch in STOP position.
Wear personal protective equipment. See under heading "Personal protective equipment".
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest service workshop.
• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
Daily maintenance
Cleaning
External cleaning
Cooling air intake
Functional inspection
General inspection
Throttle lockout*
Stop switch*
Blade guard*
Cutting blade**
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Cutting blades" and "Assembly and settings".

MAINTENANCE

Weekly maintenance
Cleaning
Functional inspection
Vibration damping system*
Muffler*
Drive belt
Carburettor
Starter housing
Monthly maintenance
Cleaning
Spark plug
Fuel tank
Functional inspection
Fuel system
Air filter
Drive gear, clutch
English – 25