Table of Contents
Advertisement
Welding/plasma cutting produces tOxic FuMES and gASSES.
Exposure to welding or cutting gasses can increase the risk of
developing certain cancers, such as cancer of the larynx and
lung cancer. Also, some diseases that may be linked to exposure
to welding or plasma cutting gasses or fumes are:
•
Early onset of parkinson's Disease
•
Damage to the reproductive organs
•
Inflammation of the small intestine or stomach
•
Respiratory diseases such as emphysema, bronchitis or pneumonia
Safety precautions, such as using natural or forced air ventilation and
wearing an ANSi approved respirator, are ESSENtiAL to reduce the
risk of developing the above illnesses.
7.
use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full
face shield if you are producing metal filings. Wear an ANSI approved dust mask or respirator
when working around metal and chemical dusts and mists.
8.
Do not overreach
running machines.
9.
Maintain tools with care
tions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged,
have them repaired by an authorized technician. The handle must be kept clean, dry, and free
from oil and grease at all times.
10.
Disconnect power
11.
Avoid unintentional starting
before plugging in.
12.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
13.
check for damaged parts
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and
any other condition that may affect proper operation. Any part that is damaged should be prop-
erly repaired or replaced by a qualified technician. Do not use the tool if any button does not
turn On and Off properly.
14.
guard against electric shock
radiators, ranges, and refrigerator enclosures.
15.
Replacement parts and accessories
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool. Approved accessories are available from Harbor Freight Tools.
16.
Do not operate tool is under the influence of alcohol or drugs
ing prescription medicine to determine if your judgement or reflexes are impaired while taking
drugs. If there is any doubt, do not operate the Welder.
SKU 3663
inhalation Hazard
. Keep proper footing and balance at all times. Do not reach over or across
. Keep tools clean for better and safer performance. Follow instruc-
. Unplug tool when not in use.
. Be sure the buttons are not depressed when not in use and
. Before using any tool, any part that appears damaged should be
. Prevent body contact with grounded surfaces such as pipes,
For technical questions, please call 1-800-444-3353.
. When servicing, use only identical replacement parts.
•
Heart Disease
•
ulcers
•
Kidney damage
. Read warning labels if tak-
Page 3
Hide quick links:
Advertisement
Table of Contents
