Remote Control - Dimplex BF362SD Owner's Manual

Operation
Figure 1
The overheat cutout will be trig-
gered if the filter is dirty. Follow
filter maintenance.
CAUTION:
continuously reset the heater, dis-
connect power and call Dimplex
customer service at
(1-888-346-7539).

Remote Control

The fireplace is supplied with a
radio frequency remote control.
This remote control has a range
of approximately 50 feet (15.25
m), it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with one of
hundreds of independent frequen-
cies to prevent interference with
other units.
!
NOTE: Before attempting any
If you need to
Manual Controls
operation with the remote control,
pull the plastic insulator strip out
from between the remote casing
and battery cover.
Remote Control Initialization/
Reprogramming
This procedure is required every
time there is a loss of power to
the remote control in the fire-
place. (i.e. power failure, breaker
tripped, On/Off switch is turned
off.)
1. Ensure that power is supplied
through main service panel.
2. Locate manual controls.
3. Activate On/Off switch. (Fig-
ure 1A)
4. Press and hold the 3-Posi-
tion Switch in the "I" position
for 5-10 seconds until the
indicator light begins to flash.
B. Mode
Selector Switch
A. On/Off
Switch
7