Opel ANTARA 2013 Owner's Manual page 120

118 Climate control
■ Fan speed
■ Temperature on front passenger
side
AUTO = Automatic mode
= Automatic air recirculation
t
= Demisting and defrosting
V
Cooling A/C, Air recirculation 4
3 116.
Note
Do not cover the interior
temperature sensor (located beside
the fan switch) or the sunlight sensor
(located in front of the windscreen
defroster vents) as this could cause
the system to malfunction.
Heated rear window RÜ 3 31,
Heated seats ß 3 39.
Automatic mode AUTO
Basic setting for maximum comfort:
■ Press AUTO button; cooling A/C is
switched on and the air distribution
and fan speed are regulated
automatically.
■ Open all air vents.
■ Set the preselected temperatures
for driver's side and front
passenger's side using the left and
right rotary knobs.
Note
All air vents are actuated
automatically in Automatic mode.
The air vents should therefore
always be open.
Temperature preselection
Recommended comfort setting is
22 °C. Intermediate settings are
possible.
Press SYNC button to automatically
adjust front passenger's side
temperature to match current driver's
side temperature. Activation is
indicated by the LED in the button.
If temperature settings are different
between driver's side and front
passenger's side, LED in SYNC
button extinguishes.
Manual settings