Adjusting The Shape Of The Picture (Geometry); Adjusting The Convergence (Convergence) - HP p1120 User Manual

HP 21" Color Monitor User's Guide
Customizing Your Monitor
Adjustment stops when either the horizontal or vertical size reaches
NOTE
its maximum or minimum value.

Adjusting the shape of the picture (GEOMETRY)

The GEOMETRY settings allow you to adjust the rotation and shape
of the picture.
The
other settings are stored in memory for the current input signal.
Select

Adjusting the convergence (CONVERGENCE)

The CONVERGENCE settings allow you to adjust the quality of the
picture by controlling the convergence. The convergence refers to
the alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
These settings are stored in memory for all input signals.
16 EnglishEnglish
Press the buttons to highlight
the button again. The SIZE/CENTER menu appears on the
screen.
Press the buttons to select
buttons to enlarge or reduce the picture.
(rotation) setting is stored in memory for all input signals. All
Press the button. The main MENU appears on the screen.
Press the buttons to highlight
the button again. The GEOMETRY menu appears on the
screen.
Press the buttons to select the desired adjustment item.
Then press the
To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the screen
Press the button. The main MENU appears on the screen.
SIZE/CENTER and press
(zoom), and press the
buttons to make the adjustment.
GEOMETRY and press