Charging Cable With Control Unit - Volvo V60 PLUG-IN HYBRID Owner's Manual

Before charging
IMPORTANT
•
The control unit should not be flooded
or immersed in water.
•
Avoid exposing the control unit and its
plug to direct sunlight. In such cases,
the overheating protection in the plug
is at risk of reducing or interrupting the
charging of the hybrid battery.
IMPORTANT
•
Check that the 230 VAC socket has
adequate power supply for charging
electric vehicles - in the event of
uncertainty the socket must be
checked by a qualified professional.
•
If the socket has unknown current
intensity - use the lowest level on the
control unit.
On the charging cable's control unit (p. 297)
select the required charging current (p. 295)
15
6-16 A . On delivery, the lowest possible
charging current is preset.
Maximum charging current may vary depending on market.
15
Opening/closing the cover for the
charging input socket
Press in the rear section of the cover and
release.
Open the cover.
Pull away the cover for the charging input
socket and secure it in the holder inside
the cover. Make sure that the cover's rub-
ber straps are bent downwards in order
to prevent the cover coming off from the
holder.
Close the cover for the charging input socket
in reverse order.
Related information
•
Charging the hybrid battery (p. 294)
•
Charging the hybrid battery - ending
(p. 303)
08 Starting and driving

Charging cable with control unit

The charging cable with its control unit is
used to charge the car's hybrid battery. Use a
charging cable recommended by Volvo.
The charging cable is located in the storage
compartment under the cargo area's floor cover.
Specifications, charging cable
Enclosure class
-32 ºC to +50 ºC
Ambient temperature
IP67
08
}}
297