Dots Appear And Remain On The Screen; Cannot Shoot Images In Succession - Sony Cyber-shot DSC-W510 User Manual

Set [Red Eye Reduction] to [Auto] or [On].
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
Retouch the image using [Retouch]
correct using "PMB". [Details]

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

The internal memory or memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
The same image is shot several times.
Set [Burst Settings] to [Single].
[Scene Recognition] is set to [Advanced].
Copyright 2011 Sony Corporation
140
[Details]
[Red Eye Correction] in viewing menu [Details], or
[Details]
[Details]
[Details]
Back to top