Smeg G30 Instructions For Use Manual page 12

Instructions for the installer
To fix the hob solidly to the counter top use the 10 supplied brackets,
tightening their screws to lock the product firmly in position. The following
figures show how to attach these brackets to the lower casing of the
product.
This appliance can also be installed in a 90 cm base. To fit the brackets
the hob must be inserted into the opening made in the counter top, with
the edge resting on the actual top. To bracket the hob laterally, just fix the
two "L" brackets to the sides of the unit (A) using the supplied screws (1)
making sure to align the slot (B) on the bracket with the rivet (C) on the
bottom of the product. Stabilise the fixing of the hob by tightening the
screw (2) in the rivet (C).
Complete the bracketing of the front and rear part of the hob as described
in the previous point.
33