The Serviceman; Troubleshooting; Error Indication List; Before Calling - Toshiba AEW-9770S Owner's Manual

BEFORE CALLING THE SERVICEMAN
W H E N
does not
• Is there a power outage?
•
Is the circuit breaker or fuses cut off?
operate
•
Is the machine's plug properly inserted into an AC socket?
•
Is the power switch ON?
making noise
•
Is there the inclination of the laundry?
•
Is your washing machine installed on an inclined or uneven
surface?
•
Are there match sticks, hairpins or metal objects being
washed with the laundry?
water leak
•
Is the faucet shape suited?
•
Are the hose coupling and the nozzle loose?
• Is the water inlet nut loose?
• Is the water supply hose connector clogged?
does not
•
If you turn the power on and press START pad
beep the end
immediately, it may not beep the end buzzer.
• Is the end buzzer turned off?
buzzer

Error Indication List

In the case the buzzer sounds and the display indicates as shown below.
Display interchangeably
Display interchangeably
If the problem is not solved despite checking, unplug the power plug and request repair.
C H E C K
About the drainage hose
• Is the hose mounted correctly?
•
Is the hose routed horizontally?
•
Is the hose frozen?
•
Is the hose damaged? Is the end exposed to water?
• Is the drainage hose clogged?
•
Is the lid open?
• Is the laundry loaded evenly?
• Is the laundry unstable or placed on an incline floor?
• Are there any symptoms occurring that are similar to
those of ?
See the section of
• Is the faucet closed?
•
Is the water pipe frozen or the water service interrupted?
•
Is the water filter/lint collector at the supply port clogged
with dirt? If the flow rate of the water is too small "E5" will
be displayed.
•
Is water supply alternate?
(Hot water cold intake valve)
(Cold water hot intake valve)
Please confirm whether a power
failure or fuse breaker is cut. Then draw
out power supply plug, insert once again
and turn the power switch on.
Please correct the inclination or non
stability of laundry in the washing
machine.
Remove them.
Adjust the inside ring of the hose union
or change faucet shape (Refer to p. 17)
Re-attaching the water (Refer to p. 17)
Re-attaching the water supply hose
(Refer to p. 17)
Reset the end buzzer sound to turn on
refer-ring to "If you wish to turn off the
end buzzer sound. (p. 12)"
above.
19
T R E A T M E N T
•
After checking, open and close
the lid once. Press the "START/
HOLD" button.
•
Close the lid.
• Correct the load status of the
laundry and the backlash of the
machine, then close the lid.
•
After checking, open and close
the lid once, press the "START/
HOLD" button.
• Check water supply correct or not
Hot water intake valve indicate
"HOT"
Cold water intake valve indicate
"COLD"