Honda 2003 Accord Coupe Owner's Manual page 307

Main Menu Table of Content
Cooling System
7. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
8. 6-cylinder models only
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7 lbf·ft (9.8 N·m , 1.0 kgf·m)
304
Maintenance
FILLER NECK
Fill up to here
4-cylinder models
9. Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
FILLER NECK
Fill up to here
6-cylinder models