Scientific Atlanta Explorer 3100HD Quick Manual

IMPORT T T T T ANT R IMPOR IMPOR ANT R ANT R ANT RULES FOR SAFE OPERA ULES FOR SAFE OPERA ULES FOR SAFE OPERA ULES FOR SAFE OPERATION
IMPOR IMPOR ANT R ULES FOR SAFE OPERA
Note to the Installer
Note to CATV System Installer CAUTION
This reminder is provided to call the CATV
RISK OF ELECTRIC SHOCK
system installer's attention to Article 820-40 DO NOT OPEN
of the NEC (Section 54, Part I of the Canadian
AVIS
Electrical Code), that provides guidelines for
proper grounding and, in particular,
specifies that the CATV cable ground shall
CAUTION: To reduce the risk of electric
be connected to the grounding system of
the building, as close to the point of cable shock, do not remove cover (or back).
No user-serviceable parts inside. Refer
entry as practical.
servicing to qualified service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
This symbol is intended to alert you that
uninsulated voltage within this product may This symbol is intended to alert you of the
have sufficient magnitude to cause electric shock. presence of important operating and
Therefore, it is dangerous to make any kind of maintenance (servicing) instructions in the
contact with any inside part of this product. literature accompanying this product.
Read and Retain These Instructions
• Comply with all warning and
• Read all of the instructions
caution statements in the
before you operate this
instructions. Observe all warning
equipment. Give particular
and caution symbols that are
attention to all safety precau-
affixed to this equipment.
tions. Retain the instructions for
future reference.
• Comply with all instructions
that accompany this equipment.
United States FCC Compliance
This equipment has been tested and found to comply with the applicable
limits of Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or TV reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult your cable company or an experienced radio/TV technician for
help
Any changes or modifications not expressly approved by Scientific-Atlanta
could void the user's authority to operate the equipment.
Important: The information shown in the FCC Declaration of Conformity
paragraph below is a requirement of the FCC and is intended to supply you
with information regarding the FCC approval of this device. The phone
numbers listed are for FCC-related questions only and not intended for
questions regarding the connection or operation for this device. Please
contact your cable service provider for any questions you may have
regarding the operation or installation of this device.
FCC Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions: 1) the device may not cause harmful
interference, and 2) the device must accept any interference received,
including interference that may cause undesired operation.
®
EXPLORER Digital Home Communications Terminal models:
Model E3100HD
Manufactured by: Scientific-Atlanta, Inc.;
4261 Communications Drive;
Atlanta, Georgia 30093-2860; USA
Telephone 770-236-1077
TION TION TION
TION
Placement Ventilation
Place this equipment in a location
This equipment has openings for
that is close enough to an electrical ventilation that protect it from
outlet to accommodate the length of
overheating. To ensure the
the power cord. Place this
reliability of this equipment, do not
equipment on a stable surface. The
obstruct the openings.
surface must support the size and
• Do not place other equipment,
weight of this equipment.
lamps, books, or any other
object on the top of this
equipment.
WARNING:
Avoid personal injury and • Do not place this equipment in
any of the following locations:
damage to this equipment. An
unstable surface may cause this - On a bed, sofa, rug, or
similar surface
equipment to fall.
- Over a radiator or a heat
register
- In an enclosure, such as a
bookcase or equipment rack,
unless the installation
provides proper ventilation
Software and Firmware Use
Scientific-Atlanta, Inc. owns copyrights to the software described in this
document and furnishes the software to you under a license agreement.
You may only use or copy this software in accordance with the terms of
your license agreement.
Scientific-Atlanta, Inc. owns copyrights to the firmware in this equipment.
You may only use the firmware in the equipment in which it is provided.
Any reproduction or distribution of this firmware, or any portion of it,
without the express written consent of Scientific-Atlanta, Inc. is prohib-
ited.
Canada EMI Regulation
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouilleur du Canada.
Trademarks
Explorer, Scientific-Atlanta, and the Scientific-Atlanta arcs logo are
registered trademarks of Scientific-Atlanta, Inc. VCR Commander and
"Bringing the Interactive Experience Home" are trademarks of Scientific-
Atlanta, Inc.
Disclaimer
Scientific-Atlanta, Inc. assumes no responsibility for errors or omissions
that may appear in this guide. Scientific-Atlanta reserves the right to
change this guide at any time without notice.
United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway,
Box 465447, Lawrenceville, GA 30042
Europe: Scientific-Atlanta Europe GmbH, Westerbachstrasse 28-32,
61476 Kronberg, Germany
Asia-Pacific: Scientific-Atlanta (Singapore) Pte. Ltd., 1 Claymore Drive,
#08-11 Orchard Towers, Singapore 229594
Latin America: Scientific-Atlanta Argentina S.A.,
Carlos Pelligrini 1149, Piso 11 o , Capital Federal 1011,
Buenos Aires, Argentina
© 2001 Scientific-Atlanta, Inc. All rights reserved.
Printed in USA www.scientificatlanta.com
Part Number 749388 Rev A November 2001
Cleaning the Equipment Lightning and Power
Before cleaning this equipment, Surges
unplug it from the electrical outlet.
Ground (earth) your cable system
Use a damp cloth to clean this
to provide some protection against
equipment. Do not use a liquid
voltage surges and built-up static
cleaner or an aerosol cleaner. Do
charges. Plug your equipment into
not use a magnetic/static cleaning
a surge protector in order to reduce
device (dust remover) to clean this
the risk of damage from lightning
equipment.
strikes and power surges. If you
Object and Liquid Entry have questions, call your cable
service provider.
Never push objects of any kind
into this product through openings Power Cord Protection
as they may touch dangerous
Arrange all power cords so that
voltage points or short out parts
people cannot walk on the cords,
that could result in a fire or electric
place objects on the cords, or place
shock. Do not expose this
objects against the cords, which
equipment to liquid or moisture.
can damage the cords. Give
Do not place this equipment on a
particular attention to the cords at
wet surface. Do not spill liquids on
the point at which the cord
or near this equipment.
connects to the plug, at electrical
Accessories outlets, and at the places where the
cords exit the equipment.
Do not use accessories with this
equipment unless recommended by
Power Sources
your cable service provider.
A label on this equipment indicates
Overloading
the correct power source for this
Do not overload electrical outlets, equipment. Operate this
equipment only from an electrical
extension cords, or integral
convenience receptacles, as this can outlet that has the voltage and
frequency that the label indicates.
result in a risk of fire or electric
shock. For equipment that requires
If you are unsure of the type of
battery power or other sources to
power supply to your residence,
operate, refer to the operating
consult your cable service provider
instructions for that equipment.
or your local power company.
User's Installation Guide
®
Explorer 3100HD
Digital Home Communications Terminal
Grounding Damage that Requires
This equipment has a two-prong Service
plug. Properly ground (earth) this
For damage that requires service,
equipment by inserting the plug
unplug this equipment from the
into a grounded electrical, two-
electrical outlet. Refer service to
socket outlet. If this plug is
qualified service personnel when
polarized, it has one wide prong
any of the following occurs:
and one narrow prong. This plug
• There is damage to the power
fits only one way.
cord or plug
• Liquid enters the equipment
CAUTION:
• A heavy object falls on the
To prevent electric shock,
equipment
match wide blade of plug to
• There is exposure to rain or
the wide slot, and then fully water
insert.
• Operation is not normal (the
instructions in this guide
If you are unable to insert this plug
describe the proper operation)
fully into the outlet, contact an
• If you drop this equipment, or
electrician to replace your obsolete
outlet. damage the cabinet of this
equipment
Servicing
• If this equipment exhibits a
Do not open the cover of this
distinct change in performance
equipment. If you open the cover,
your warranty will be void. Refer Upon completion of any service or
all servicing to qualified personnel repairs to this equipment (home
only. Contact your cable service terminal), ask the service technician
provider for instructions. to perform safety checks to
determine that the equipment is in
proper operating condition.