Chimney Components Lists - Lennox Brentwood LV Installation And Operation Instructions Manual

CHIMNEY - PARTS AND COMPONENTS LISTS
Secure Temp ASHT 1" High Temp. Insulated Stainless Steel Chimney
6" I.D and 8" O.D., Double-Wall Stainl. Steel, Listed to CAN/UCL-S604 and UL-103HT
Description
Lengths and Misc. Chimney Components
8" length, 6" Dia., 6L8
12" length, 6" Dia., 6L12
18" length, 6" Dia., 6L18
24" length, 6" Dia., 6L24
36" length, 6" Dia., 6L36
48" length, 6" Dia., 6L48
Adjustable Length 12", 6" Dia., 6LA
15º elbow, 6" Dia., 6E15
30º elbow, 6" Dia., 6E30
Rain Termination Cap, 6" Dia., 6CC
Spark Arrester Screen (universal spark arrester band), PE
Wall Band, BM
Offset Support, SO
Roof Support, ST
Roof Brace, BS2
Firestop, 6BF
Radiation Shield, 6RS
Insulated Attic Radiation Shield, 6RSA
Insulated Wall Radiation Shield, 6RSM
Insulated Wall Radiation Shield, 30º, 6RSMI30
Uninsulated Wall Radiation Shield, 30º, 6RSM30
Attic Radiation Shield
Roof Flashings
Flat Roof Flashing, 6FR
1/12 - 7/12 (5º - 30º), 6FAR
8/12 - 12/12 (30º - 45º), 6FBR
Storm Collar, 6FC
Part/Cat. No.
6L8
6L12
6L18
6L24
6L36
6L48
6LA
6E15
6E30
6CC
BM
Supports
BS2
Firestops
6BF
6RS
6RSA2
6RSM
6RSMI30
6RSM30
H0487
6FR
6FAR
6FBR
6FC
Fireplace Model Brentwood LV - Approved Venting Components manu-
factured by Security Chimneys International only.
• 6" diameter chimney - AC (air cooled), Secure Temp™ ASHT (or
Nova Temp™ HT6103+) and Secure Temp S-2100+ (or Nova Temp
HT6000+).
• 6" diameter chimney for relining masonry chimneys - TUBINOX
chimney (or PROJET SS), 6" diameter with adaptor for installation in
a masonry chimney.
Notes:
j
N ova Temp HT6000+ is equivalent to Secure Temp S-2100+
k
N ova Temp HT6103+ is equivalent to Secure Temp ASHT
l
T his appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for that chimney will be required.
m
Chimney Adaptor (S-2100+ / HT6000+) for CANADA ONLY - If you want to
install a S-2100+ / HT6000+ chimney, an adaptor is available (6UCA).
n
A C Chimney is NOT recommended at elevations above 4,000 feet or in cold
climates (climates where temperatures will fall below 32° F / 0° C). When
using AC chimney, an AC6SB starter section must be used before installing
PE
an elbow. When an offset is needed immediately off the top of the fireplace,
an elbow starter section, AC6SB30 (H3780), is available.
SO
ST
25