Lights
Replacing a Road Lamp Bulb
H
H
O
O
L
L
D
D
I
I
N
N
G
G
C
C
L
L
I
I
P
P
S
S
1.
Use a flat-tipped screwdriver to
remove the three holding clips
from the splash shield. Pull the
splash shield down.
2.
Remove the socket by turning it
one-quarter turn counterclockwise.
254
Maintenance
3.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4.
Insert the socket and turn it one-
quarter turn clockwise to lock it in
place.
5.
Turn on the headlights to test the
new bulb.
6.
Put the splash shield in place.
Reinstall the three holding clips.
Lock each clip in place by pushing
on the center.