Table of Contents
Advertisement
5.
For each check performed by this task, one of the following status indicators is displayed:
PASS
FAIL
WARN
N/A
6.
Optional: To print a copy of the output, click View Printable Report, then click Print.
This task writes detailed information to the log file (/var/adm/syslog/vseassist.log on
HP-UX systems, installation-directory\logs\vseassist.log on Microsoft Windows
systems). Check the log file for details of any problems encountered.
TIP:
The vseassist command line that was executed by this task is displayed on this screen
above the output box. This command is also displayed in the printable version of the report. You
can use this information to create your own diagnostic scripts that can be run from the command
line.
You can review these results again later by selecting Tasks & Logs View Task Results... from
the HP SIM menu bar.
vseassist command
The vseassist command, which implements the Diagnose menu actions described in the
previous section, can also be executed directly from the command line on the CMS. If you are
unable to resolve communication issues with one of your managed systems, you can install or
copy this command to the managed system and run it from the command line there.
For details of the command line options, suggested diagnostic procedure, and examples, see
vseassist(1M) [p.
command line using the man command.
28
Troubleshooting
No configuration problem was found
A serious configuration problem was found. You must resolve the problem for correct
operation of Insight Dynamics.
A configuration problem was found. The problem will not necessarily prevent correct
operation of Insight Dynamics, but it may limit or restrict operation of some features.
Not Applicable: the check does not apply to this type of system.
36]. On an HP-UX CMS, this reference page can also be viewed from the
Advertisement
Table of Contents
