HP LP2480ZX User Manual page 31

Table 4-2 OSD Menu (continued)
Icon Main Menu
PIP Control
Submenu Description
●
●
●
●
●
●
●
Clock Minimizes any vertical bars or strips visible on the screen
background. Adjusting the Clock will also change the horizontal
screen image.
Clock Phase Adjusts the focus of the display. This adjustment allows you to
remove any horizontal noise and clear or sharpen the image of
characters.
Black Level Adjusts the black level or offset of the monitor. The factory default
value is 128 (no offset) and the range is 0 to 255.
OverDrive Disables or enables the overdrive feature. The factory default is
Enabled.
NOTE:
watching motion video.
Hue Adjusts the Hue settings for the HDMI, Component, S-Video, and
Composite inputs.
Saturation Adjusts the Saturation settings for the HDMI, Component, S-
Video, and Composite inputs.
Sets up PIP functionality.
NOTE:
window. Component, S-Video, and Composite are supported for
the secondary window.
PIP Mode Enables PIP mode (PIP or Side-by-Side).
PIP Position Sets the position of the PIP window on the screen. The choices
are top right, top left, bottom right, or bottom left.
Sub Picture Select Selects the input source for the PIP window. The choices are
Component, S-Video, or Composite video signal inputs.
Fill to Screen—image fills the entire screen and may look
distorted or elongated because of non-proportional scaling of
height and width
Fill to Aspect Ratio—image is sized to fit the screen and
maintains proportional image
One-to-one—disables video scaling, displays an image that
is smaller in size than the monitor's capability and centers the
image on the screen in the active viewing area
Overscan—enables over-scanning of the image for HDMI,
Component, S-video, and Composite inputs
Crop Right Side—crops the video on the right side of the
image (enabled for the supported horizontal resolutions over
1920 pixels)
Crop Left Side—crops the video on the left side of the image
(enabled for the supported horizontal resolutions over 1920
pixels)
Crop Left and Right (Center)—crops the video on the left and
right sides in equal amounts and centers the image (enabled
for the supported horizontal resolutions over 1920 pixels)
OverDrive improves the response time of the panel for
DVI-I, HDMI, and DisplayPort are supported for the main
Adjusting the Monitor Settings 25