Monitor Specifications; Power Management Modes; Pin Assignments; Vga Connector - Dell U2410 User Manual

3 DisplayPort Connector
4 HDMI Connector
5 DVI Connector-1
6 DVI Connector-2
7

VGA Connector

8 Composite Video Connector
9 Component Video Connectors
10 Audio Out (Support two channel output )
11 USB Upstream Port
12
USB Downstream Port
Stand Lock （Use a M3x14 threaded screw to
13
lock stand, screw not provided）

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in
use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:
VESA Modes Horizontal
Sync
Normal operation (with Active
max luminance, Dell
Soundbar and USB
active)
Normal operation Active
Active-off mode Inactive
Switch off -
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: This monitor is TCO' 03 power management compatible.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the power cable from the
monitor.

Pin Assignments

VGA Connector
Pin 15-pin Side of the
Number Connected Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
Vertical Sync Video Power
Indicator
Active Active Blue
Active Active Blue
Inactive Blanked Amber
- - Off
Power Consumption
132 W (Maximum)
75 W (Typical)
Less than 1 W
Less than 1 W