Installing The Palm Rest - Dell Vostro 1440 P22G Owner's Manual

7. Pry up the palm rest using a plastic scribe to release all the snaps on the bottom,
left, and right sides of the palm rest. Once all the snaps have been released, lift up
the palm rest from the computer and remove.

Installing The Palm Rest

1. Insert the palm rest towards the display screen at a 30–degree angle.
2. Align and adjust the palm rest into position before pressing it down to secure all the
snaps.
3. Connect the power board cable and touchpad cable to their respective connectors.
4. Install the screws that secure the palm rest to the computer.
5. Flip the computer around and install the screws that secure the bottom base.
6. Install the keyboard.
7. Install the battery.
8. Follow the procedures in
24
After Working Inside Your Computer.