Dell 3008WFP User Manual page 24

NOTE:
Push
Back
Use
Mode
PBP Source Select an input signal for Picture by Picture (PBP). (DVI-1/DVI-2/HDMI/Composite/S-Video).
Use
Preset Modes You can choose different color presets for different viewing modes.
Desktop mode is for desktop applications. (DVI input source only.)
sRGB mode emulate 72% NTSC color. (DVI input source only.)
Movie mode is suitable for movie playback. (Video input sources only. HDMI/Composite /S-Video )
Nature mode is suitable for nature scenes. (Video input sources only. HDMI/Composite/S-Video )
Use
Contrast Adjust the contrast level of the picture in Picture by Picture (PBP) Mode.
button reduce the contrast.
button increases the contrast.
NOTE:
Hue This function shifts the color of Picture by Picture (PBP) image to green or purple. This is used to adjust for desired flesh tone color.
Use
makes video image shade into greenish.
makes video image shade into purplish.
NOTE:
Saturation Adjust the color saturation of Picture by Picture (PBP) image.
Use
button makes the image look more monochrome.
button makes the image look more colorful.
NOTE:
Push
Exit Menu
OSD Warning Messagess
When the monitor does not support a particular resolution mode you will see the following message :
When using DVI source, the contrast adjustment is not available.
to go back to the main menu.
and buttons to browse and
and buttons to browse and
and buttons to browse and
Contrast adjustment only available for video input.
and buttons to adjust the hue from '0' to '100'.
Hue adjustment only available for video input.
and buttons to adjust the saturation from '0' to '100'.
Saturation adjustment only available for video input.
to exit the OSD main menu.
to select Picture by Picture (PBP) "On" or "Off".
to select.
to select
or