Remote Control - Excalibur iBlaster 184 User Manual

Audio Cable:
Transfers the audio signal from the control box to the subwoofer.
The spec on the audio cable is 2m x 1.
Figure 5: Audio Cable
5.1 Audio Cable:
Transfers the audio signal from a 5.1 audio device to the control
box and subwoofer.
Figure 6: 5.1 Audio Cable

Remote Control:

IR
Point the remote to the Receiver on the control box.
S :
Press to turn the system
TANDBY
by mode, a blue light will surround the white button on the control box.
When the system is on, the blue light is off.
M :
Press to mute the volume. Press again to turn the volume back on.
UTE
R :
EAR Press the UP button to increase the volume of the rear left and
8
or . When it is off or in stand-
ON OFF
Figure 7: Remote Control
right speakers. Press the button to decrease the volume of the rear left
DOWN
and right speakers.
C :
ENTER Press the UP button to increase the volume of the center speak-
er. Press the DOWN button to decrease the volume of the center speaker.
F :
Press the button to increase the volume of the front left and
RONT UP
right speakers. Press the button to decrease the volume of the front
DOWN
left and right speakers.
M :
Press the button to increase the volume of all of the speak-
ASTER UP
ers. Press the button to decrease the volume of all of the speakers.
DOWN
S :
UB Press the UP button to increase the bass from the subwoofer. Press
the DOWN button to decrease the bass from the subwoofer.
5.1CH:
Press to select the 5.1CH audio signal, when connected.
ST:
Press to select the stereo audio signal, when connected.
9