123‚Ý~„p~„m
Using UBASE (type the name) to convert to the default unit (1 m) results in:
Operations with units
Here are some calculation examples using the ALG operating mode. Be
warned that, when multiplying or dividing quantities with units, you must
enclosed each quantity with its units between parentheses. Thus, to enter,
for example, the product 12.5m
(12.5_m)*(5.2_yd) `:
which shows as 65_(m yd).
function UBASE (find it using the command catalog, ‚N):
NOTE: Recall that the ANS(1) variable is available through the
keystroke combination „î(associated with the ` key).
To calculate a division, say, 3250 mi / 50 h, enter it as
which transformed to SI units, with function UBASE, produces:
Page 3-11
To convert to units of the SI system, use
(3250_mi)/(50_h) `
5.2 yd, type it to read