Samsung ATIV Odyssey User Manual page 133

3. Your device displays a list of discovered, in-range
Bluetooth devices. Touch a device from the list to
initiate connecting.
4. Enter the passkey or PIN code, if needed, and touch ok.
5. The external device then has to also accept the
connection and enter your device's PIN code.
Once successfully connected to an external device,
appears at the top of your screen and connected
appears under the device name.
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different.
Note: Connecting between two Bluetooth devices is a one-
time process. Once a connection has been created, the
devices continue to recognize their partnership and
exchange information without having to re-enter a
passcode.
128
Disconnecting Bluetooth Devices
Disconnecting a connected device breaks the connection
between the device and your phone, but retains the
knowledge of the connection. At a later point when you want
to reconnect the device, there is no need to set up the
connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch the
previously connected device. The status changes to
not connected.
3. Touch the device name again to reconnect.
4. To delete the device name from your list of Bluetooth
devices, touch and hold the device name until delete
displays. Touch delete to remove the device from
your list.
Note: Disconnections are manually done but often occur
automatically if the connected device goes out of range
of your phone or it is powered off.