Stat-Two Commands - HP 39g+ User Manual

Stat-One commands
DO1VSTATS
SETFREQ
SETSAMPLE

Stat-Two commands

DO2VSTATS
SETDEPEND
SETINDEP
Programming
Calculates STATS using datasetname and stores the
results in the corresponding variables: N , Tot , Mean ,
PVar , SVar , PSDev, SSDev, Min , Q1, Median, Q3,
and Max . Datasetname can be H1, H2, ..., or H5.
Datasetname must include at least two data points.
DO1VSTATS datasetname:
Sets datasetname frequency according to column or
value. Datasetname can be H1, H2,..., or H5, column
can be C0–C9 and value can be any positive integer.
SETFREQ datasetname;column:
or
SETFREQ definition;value:
Sets datasetname sample according to column.
Datasetname can be H1–H5, and column can be
CO–C9.
SETSAMPLE datasetname;column:
Calculates STATS using datasetname and stores the
results in corresponding variables: MeanX, X, X2,
MeanY, Y, Y2, XY, Corr, PCov, SCov, and RELERR.
Datasetname can be SI, S2,..., or S5. Datasetname must
include at least two pairs of data points.
DO2VSTATS datasetname:
Sets datasetname dependent column. Datasetname can
be S1, S2, ..., or S5 and column can be C0–C9.
SETDEPEND datasetname;column:
Sets datasetname independent column. Datasetname can
be S1, S2,..., or S5 and column can be C0–C9.
SETINDEP datasetname;column:
16-29