Toshiba 23PB200 Series Owner's Manual page 10

4
Press Q to display the Auto Signal Booster
menu, and then  or  to select Yes or No.
Auto Signal Booster
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode :
This function performs automatic distinction of
On or Off .
5
Press Q to display the Auto Tuning startup
screen. Press Q to start the automatic search.
Auto Tuning
Progress
1%
When the automatic search is completed,
the TV will automatically appear the Manual
Tuning menu.
Use the Manual Tuning operation if desired
channels cannot be preset with the Auto
Tuning or if you would like to preset channels
to specifi c position numbers one by one.
Manual Tuning
Pos. Label
1
2
3
4
6
Press  or  to select the programme position
you want to arrange and press Q to display the
breakdown menu.
Press  or  to select an item, then press  or
 to select the item as shown below.
Manual Tuning
Position
0 1 B/G A
A C
B D
A. Position selection
B. System (Sound) (- page 22)
C. Colour System (- page 22)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is abnormal,
the automatic colour system selection (A)
may have malfunctioned, or sound system
selection is wrong. In such a case, select
another colour and/or sound system (-
page 22).
Yes
Found
0
0 On
E G
F H
D. Position skip selection
Press  or  to turn the position skip option
on "8" or off "(". The position will then be
skipped when you select channels with PU
or Pu. The "8" mark will appear beside a
position number when you use the Number
button on the remote control.
E. Channel search operation
Press  to search up the band or  to search
down the band.
Press  or  repeatedly until your desired
channel is displayed.
When a station is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS WHILE
THE SET IS TUNING.
F. Manual Fine Tuning
Press  or  until better picture and sound
are obtained.
G. Signal Booster
If the receiving signal is weak/strong and the
picture is noisy, the picture may be improved
when using this function.
Press the  or  to turn the Signal Booster
On or Off .
H. Label
Station labels appear on the right of the
programme position display each time you
turn on the TV, select a channel, or press
To change or create station labels:
1) Press  or  repeatedly to select a
character for the fi rst space, then press 
or .
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank space
in the label name, you must choose a
blank space from the list of characters.
Press Q to store your settings.
Notes:
• The Quick Setup, Location, Auto Tuning, Manual
Tuning menu can also be display at any time from
the SETUP menu.
• When you preset the channel which sound of
broadcast transmission system adopts "M" system
(- page 22), the sound system may not be tuned
correctly if the radio waves transmit badly. At that
time, preset the channel by Manual Tuning.
– 10 –
.
(blank space)