Table of Contents
Advertisement
Contacts
This feature is useful when using voice mail or other
automated phone systems that require you to dial a
phone number and then enter an access number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your handset dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears. The
W means your handset waits here before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your handset dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
32
Tip: You can create pauses and waits while
dialing a number from the keypad. See
"Creating Pauses and Waits While Dialing"
on page 61.
International Numbers
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A "0"
appears, then changes to a "+".
Note: The network translates the "+" into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code, or area code,
and phone number.
For information about making international calls, see
"Making International Calls" on page 61.
Advertisement
Table of Contents
