Connecting a Mono TV, Mono VCR and
Stereo Receiver or Amplifier
1
Connect an RF coaxial cable between the cable wall outlet and the
CABLE IN connector on the DCT2000.
2
Connect the RF coaxial cable, supplied with the DCT2000,
between the RF IN and TO RF IN connectors on the DCT2000.
3
Connect a RF coaxial cable between the CABLE / ANTENNA IN
connector on the mono VCR and the TO TV / VCR connector on
the DCT2000.
4
Connect a RF coaxial cable between the To TV connector on the
mono VCR and the CABLE / ANTENNA IN connector on the mono
TV.
5
Connect a stereo audio cable between the AUDIO OUT R and L
connectors on the DCT2000 and the AUX IN R and L connectors
on the stereo receiver.
6
Connect a stereo audio cable with a Y- adapter between the
OUTPUT AUDIO connector on the Mono VCR and the TAPE 1 IN
R and L connectors on the stereo receiver.
DCT2000s with the Home Theater option offer S-Video, an output that
may provide a higher level of picture quality. If your components offer S-
Video connections, they may be used in place of RCA video
connections.
2 3