Installing Batteries To The Remote Control - ProScan PLED2435A User Manual

8. YPbPr – This connection port is for DVD players or satellite / cable set-top boxes
that use component cables. From left to right, connect green, blue, and red for
video, and then connect white for left channel audio, and red for right channel audio.
This port shares the audio jacks with Video.
9. SPDIF - This connection port is used for sending out digital audio signals to digital
surround sound receivers. The orange (COAX SPDIF OUT) connector sends out
either bit-stream or PCM digital sound signal to a home theater receiver with digital
coax input.
Please Note:
• This TV features a power saving function which will turn off the TV
automatically after 10 minutes of idling on a connection with no signal. This
feature is present on all connection.

Installing Batteries to the Remote Control

Please insert the AAA batteries into the remote control. Make sure the (+) side and the (-) side are
installed correctly. When you are installing the battery, the remote's backside should be facing up.
Afterwards, re-attach the battery cover.
Please note:
•
Only use AAA batteries.
•
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or
lead to personal injury.
•
Dispose the batteries in accordance with local laws and regulations.
•
Keep the batteries away from children and pets.
•
If the remote control is not used for a long time, remove the batteries.
•
Keep the remote control away from moisture, sunlight, and high temperatures.
- 10 -