Video output and Line in
Using the Component Video Output
The Component Video Output
will only output video from a
docked iPod, iPhone or iPad.
1.
Connect a component video cable
(not included) to the Component
Video Output and a television.
2.
Adjust the connected television
to the proper input setting.
Press the Video button on the remote.
3.
4.
Video from a docked iPhone/iPod/iPad
can now be played through the bar
speaker to the connected television.
Customer Support: 1-888-999-4215
Using the 3.5mm Audio Input
Requires a 3.5mm audio cable
(not included)
1.
Connect a 3.5mm audio cable
to the Line In on the speaker
and an audio output on an MP3
player or other audio source.
Press the Source button to
2.
switch to Line In Mode.
3.
Use the native controls on the
connected MP3 player or other
audio source to play and control
audio played through the speaker.
11