Pirelli Discus DP-L10 User Manual page 80

8 Chapter
Register port
Register period
Outbound server
Outbound port
RTP audio port
RTP pkt.period
Preferred codec
1. From the idle mode, press
(WLAN) >
OK key
2. Enter Username, Password, and all the information provided by your
service provider.
When all the settings are correct, and the DP-L10 successfully registers to the
network, the bold VoIP indication will remain displayed.
80
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
SIP register port
number.
The IP address of
the outbound proxy
server
The port number of
the outbound proxy
server
.
The Real-Time
Transport Protocol
port base configured
for the IP phone
Voice codec:
G.711U
G.711A
G.726-32
G.726-16
G.729 (this codec may
be available in
alternative to G.726;
please check with your
service provider).
OK key
OK key > Scroll down
Default: 5060
Default: 3600
You can use either a
dotted IP address or
a DNS name
The default is 5060.
Default: 9000
.
Default:20
(Menu) > Scroll down
(four times) (SIP settings) >