HP OmniBook 5700 Installation And Setup Manual page 75

COM Ports
Printers
Card Slots
Infrared Communications
Input Devices
Pointing Devices
Keyboard
Power Management
Uninstall
Password
Library
(Control menu, About)
Sets serial and infrared port addresses and interrupts.
Sets printer options.
Starts the CardWizard application for managing PC cards.
Starts IrMonitor or sets when it starts. IrMonitor provides IrDA communications.
Sets pointing device or mouse settings.
Sets keyboard repeat settings.
Options for Battery Power
Balances the tradeoffs between power savings and performance speed while operating on battery
power. Click Custom to set time-outs individually.
Idle Time before Turn-Off
Shows the individual time-outs.
Lets you remove selected sets of OmniBook software from the hard disk.
Set Admin Password
The administrator password provides protection equal to the user password plus PC ID and
OmniBook setting protection. The administrator password can be used whenever the user password
is requested, such as when changing the user password.
Admin Password Required
Sets whether changes to PC ID and OmniBook settings are protected by the administrator password.
Set User Password
The user password protects certain events, but doesn't give access to protected administrator
options, such as PC ID.
User Password Required
Sets whether a password is required when the computer starts, before undocking, or when changing
OmniBook settings such as those in the SCU.
Opens the OmniBook User's Guide and other online sources of information.
Shows the BIOS version and the amount of system memory.
Changing the Configuration
Using OmniBook Tools
4-7