Cleaning The Optional Micr Mechanism - Epson TM-H5000II series Operator's Manual

2. Following the instructions on the label, rotate the knob until the
appears in the hole.
3. Close the cutter cover.

Cleaning the Optional MICR Mechanism

MICR cleaning (when the printer is used with a MICR reader)
Use a moistened cleaning sheet for the MICR head. Use an
adhesive cleaning sheet for the MICR feed roller. See the table
below for cleaning frequency.
Part to clean
MICR head
MICR feed roller
Note:
If you encounter frequent MICR reading errors, use one of the two
methods described below.
Type of cleaning sheet
Moistened cleaning sheet
Adhesive cleaning sheet
Cleaning frequency
Every 6000 passes or once a
month
Every 6000 passes or once a
month
Troubleshooting 3-7