Bestview-Face Recognition; Using Best View; Where To Find It - TANDBERG Codec C60 User Manual

What's in this guide? Getting started
BestView—Face recognition
The TANDBERG C60 is capable of doing face recognition.
The face recognition system aims to search for faces in order to optimize
the picture frame, and is therefore called BestView. Once a face or
group of faces has been detected camera zoom and camera angle will be
changed accordingly to obtain an optimal representation on the screen.
Kindly observe the following:
• The Best view feature is still a preview feature.
• The Best view optimization process may take up to 5 seconds.
• The detection of faces works better when people look towards the
camera.
• The area from the eyebrows down to just below the lips should be
uncovered.
• Beard is normally not a problem.

Using Best view

1. Press the key on the remote control to display the Layout menu.
Select Selfview to be shown as required
2. Press the key on the remote control to display the Home menu and
select Camera control
In the Camera control menu, locate the Best view button at the bottom
3.
of the screen
Press the corresponding Function key on the remote control to start the
4.
Best view optimization process. Look towards the camera for about five
seconds
5. The system will now look for faces and adjust the zoom and camera
angle to obtain a best fit.
D14369.02 USER GUIDE TANDBERG C60—FEBRUARY 2009
Making calls Using the phone book

Where to find it:

The Best view feature
is found in the Camera
control menu
26
In-call features
In-call features Contact information Contact information
Best view (beta)
Use this
softkey to exit
Best view
Exit