Fellowes P-20 Quick Manual page 2

Shredder head
Paper entry
Sheet capacity icon
Bin
SET-UP
Place shredder head securely on top of bin.
CAPABILITIES
Will shred: Paper only
Will not shred: Continuous forms, adhesive labels, transparencies,
newspaper, cardboard, paper clips, laminates or plastic other than
noted above
Paper shred size:
Strip-Cut ...........................................................................................7mm
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands
away from paper entry. Always unplug when not
in use.
• Keep foreign objects – gloves, jewelry, clothing,
hair, etc. – away from shredder openings. If object
enters top opening, switch to Reverse (R) to back
out object.
• The grounded socket-outlet shall be installed near the equipment and
shall be easily accessible.
2
Maximum:
Sheets per pass (Cross-Cut) ................................................................... 5*
Paper entry width ......................................................................... 220mm
Continuous operation ................................................................. 2 minutes
* 70g A4 paper at 220-240v, 50Hz, P-20–0.6Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Recommended daily usage rates:
10-20 paper passes.
• Never use aerosol, petroleum based or other flammable
• Do not use if damaged or defective. Do not open shredder
15
• 5 sheets per pass to avoid jams.
products on or near shredder. Do not use canned air
on shredder.
head. Do not place near or over heat or water source.
ENGLISH
Model P-20
See safety instructions below
P - 5 +
Control switch
Auto-On (I)
Off (O)
Reverse (R)