Table of Contents
Advertisement
Chapter 4 Award BIOS Setup
4-8. PNP/PCI CONFIGURATION
Choose 〝PNP/PCI CONFIGURATION〞 from the main menu, a display
will be shown on screen as below:
Init Display First
Reset Configuration Data
Resources Controlled By
x IRQ Resources
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
The PNP/PCI Configuration Setup describes how to configure PCI bus system.
PCI, also known as Personal Computer Interconnect, is a system, which
allows I/O devices to operate at speeds nearing the speed of the CPU itself
uses when communicating with its own special components.
This section covers technical items, which is strongly recommended for
experienced users only.
INIT DISPLAY FIRST:
This item allows you to decide to active whether PCI Slot or on-chip VGA
first.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system configuration has caused such a
serious conflict that the operating system cannot boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth
and Plug and Play-compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system
Page: 4-20
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
F6: Fail-Safe Defaults
PNP/PCI Configuration Setup Screen
[PCI Slot]
[Disabled]
[Auto (ESCD)]
Press Enter
F7:Optimized Defaults
PMB-531LF USER
Item Help
Menu Level ►
'
S MANUAL
Advertisement
Table of Contents
