Table of Contents
Advertisement
Setting up the telephone – installation wizard
Setting up the telephone – installation wizard
A few settings are needed before you start using your telephone. The installation
wizard is designed to help you with this.
If you start the ISDN wizard first, the connection assistant starts automatically.
If you place the first handset in the base before the MSN settings have been made,
the message key begins to flash after a short time (¢ page 2).
¤ Press the message key f to start the ISDN wizard.
You can also call up the ISDN wizard at any time via the menu (¢ page 31).
Please note:
u If the installation wizard is activated, no other handset can access the Settings
menu.
u To quit the installation wizard before the process is complete, press and hold
the end call key a. Changes you have already saved using
u To skip a setting, press the display key
ISDN wizard – assigning/entering the connection's MSNs
Several numbers (MSNs) were provided by the network provider when you
received your ISDN connection confirmation. You can save up to ten numbers
(MSNs) on your phone. If there is no MSN entered, you can do the following with the
ISDN wizard:
u Assign the MSNs for your connection i.e., call these up from the exchange
(automatic MSN assignment) or enter these manually.
Please note: Not every ISDN provider supports automatic MSN assignment.
If this feature is not supported, then you must enter the MSNs for your connec-
tion manually (¢ page 73).
u Set the receive MSN
u Set the send MSN
16
ISDN Wizard
?
Start ISDN
installation wizard?
No
Yes
§No§
.
¤ Press the display key
installation.
§OK§
are retained.
§Yes§
to start
Advertisement
Table of Contents
