Sound - Kawai MP7 Owner's Manual

EDIT Menu parameters


Sound

1. Volume
This parameter adjusts the volume level of the selected sound
independently of the zone's volume fader.
3. Filter Cut-off
This parameter adjusts the frequency of the cut-off. Raising
the cut-off level increases the brightness of the sound, while
lowering the cut-off level results in a duller sound.
5. DCA Attack Time
This parameter adjusts the length of the attack. Higher values
increase the attack time, resulting in a longer, slower attack for
the selected sound.
7. DCA Sustain Level
This parameter adjusts the volume level of the sustain heard
while the key is held for the selected sound.
9. DCF Attack Time
This parameter adjusts the length of the filter's attack. Higher
values increase the attack time, resulting in a longer, slower
attack for the filter.
11. DCF Decay Time
This parameter adjusts the length of the decay from peak level
to sustain level for the filter.
13. DCF Release Time
This parameter adjusts the amount of time required for the
filter to fade out after the keys are released.
15. DCA Touch Depth
This parameter adjusts how much the velocity affects the
amplitude envelope depth.
2
(INT mode)
2. Panpot
: 0 ~ 127
value
This parameter adjusts the left/right position of the selected
sound within the stereo field.
4. Filter Resonance
: –64 ~ +63
value
This parameter adjusts the amount of the harmonic overtone
around the cut-off frequency for the selected sound.
6. DCA Decay Time
: –64 ~ +63
value
This parameter adjusts the length of the decay from peak level
to sustain level for the selected sound.
8. DCA Release Time
: –64 ~ +63
value
This parameter adjusts the amount of time required for the
sound to fade out after the keys are released for the selected
sound.
10. DCF Attack Level
: –64 ~ +63
value
This parameter adjusts the level of the filter's attack.
12. DCF Sustain Level
: –64 ~ +63
value
This parameter adjusts the level of the filter's sustain heard
while the key is held for the selected sound.
14. DCF Touch Depth
: –64 ~ +63
value
This parameter adjusts how much the velocity affects the filter
envelope depth.
: –64 ~ +63
value
* With the exception of Volume, the Sound parameters on these pages will
not be available when tonewheel organ mode is selected.
: l64 ~ r63
value
: –64 ~ +63
value
: –64 ~ +63
value
: –64 ~ +63
value
: –64 ~ +63
value
: –64 ~ +63
value
: –64 ~ +63
value