Hotpoint Ultima WD860 Instructions Manual page 16

To select a programme to suit your individual requirements use the following
series of tables, explaining the wash programme buttons and programme details.
The programmes have been listed by Fabric Type.
The programme times 'Time to End' . ..
For each wash programme and option(s) selected the machine automatically
calculates the estimated programme length 'Time to End' . This is displayed in
hours and minutes shortly after the wash programme temperature has been
displayed. The 'Time to End' will then remain lit throughout the wash programme
and counts down to the end of the programme.
Note: These estimated programme times are dependant on the temperature and
pressure of the incoming water supply, the option(s) selected and the load being
washed. They may, therefore change during the fill stages of each programme to
take into account the extra heating or filling time required.
To review the current wash programme during the wash cycle...
This feature allows you to check the running wash programme.
To view the temperature of the selected programme - press the
'Variable Temperature' button once.
To view the spin speed of the selected programme - press the
'Variable Spin Speed' button once.
After a few seconds the display window will return to the 'Time to End' showing
the remaining programme length.
If you decide the selected programme does not suit your requirements you can
change the programme, see previous page 'To change a programme' .
Fabric type - Cotton
Wash Press
Label Button
Once
Twice
Three
times
16
Wash programmes
Display
Window
Fabric
shows
Non-Colourfast cotton,
linen or viscose
Colourfast cotton
linen or viscose without
special finishes
White cotton and linen
without special finishes
Wash
Maximum
Temp
Spin speed
dry weight
˚C
load
6kg
40
60 6kg
95
6kg
(rpm)
1600
1600
1600