Variable Spin - Hotpoint WD72 Instructions For Installation And Use Manual

STEP 5
Cancel Button
To start the selection again, press and hold the cancel button for a few seconds, all settings displayed will disappear and the
Infobubble™ will display 'Select Programme' .
NOTE:
If pressed when setting 'Time Delay' or when time delay is
active, time delay is cancelled but the selected wash programme and
optional wash features will remain, the Infobubble™ will display
these. Press start to proceed with the programme.
Rinse Hold / Fabric Care
Not available with Programme 'F' .
Press Action
Button
x1 Rinse - Minimises creasing of silk by
Hold suspending wash load in final
rinse water.
Note: To spin, press the 'Rinse Hold' button again ( the Infobubble™ display
will remind you to do this, or select the buzzer).
x2 Fabric - Protects delicates with a
Care gentle wash, automatic rinse
hold and 800rpm spin.
x3 Cancel
Bioprofile / Time Saver
Press Action
Button
x1 Bioprofile - Increases water temperature
at stages to ensure maximum
wash performance from your
biological detergent.
x2 Time - Saves up to 25 minutes on
Saver lightly soiled items by
reducing the wash & spin
time of any programme.
x3 Selects Bioprofile & Time Saver together
x4 Cancel
Variable Temperature
Press Action
Button
x1 & Hold Reduce programmed temperature in 5˚C
intervals to a minimum of 30˚C
x2 Cancel
Optional Wash Features
Drying Programme / Drying Time
Not available with Programme 'F' .
Press
Button
x1
x2
Infobubble™
Display
Note: To increase drying time by 10 minute increments, up to 120 minutes,
press and hold button.
Start, Buzzer / Time Delay
Press
Button
x1 & Hold Buzzer
Infobubble™ Note: When the button is released the programme will start automatically
Display
and the Infobubble™ will display 'Starting Programme'.

Variable Spin

Press
Button
x1
x2 & Hold Reduce spin speed by 100rpm intervals to
x3
Variable Rinse
Not available with Programme 'F' .
Press
Infobubble™
Button
Display
x1
x2
x3
Action
Selects low heat programme
Selects full heat programme
Action
- Lets you know when the
programme has finished or
when Rinse Hold is activated.
Time - Gives you the option to delay
Delay your wash programme from
1 to 18 hours.
Action
Display existing programme spin speed.
400rpm or '0' (no spin).
Return to normal programme setting.
Action
Add a rinse for sensitive skin.
Delete a rinse to save time and water.
Return to normal programme setting.
Infobubble™
Display
Infobubble™
Display
Infobubble™
Display
Infobubble™
Display