Removing The Chassis Cover And Feet - Supero 7046GT-TRF User Manual

S S
UPER ERVER 7046GT-TRF/7046GT-TRF-TC4 User's Manual
2-5 Installing the Chassis onto a Rack
This section provides information on installing the SC747 chassis into a rack unit
with the optional 4U 17.2" width rail set (MCP-290-00059-0N). There are a variety
of rack units on the market, which may mean the assembly procedure will differ
slightly. You should also refer to the installation instructions that came with the rack
unit you are using.
NOTE: The outer rail is adjustable from 26" to 38.25".
NOTE: The MCP-290-00059-0N rail kit is an optional accessory.

Removing the Chassis Cover and Feet

The SC747 chassis is shipped with the chassis cover and feet pre-installed. Both
the feet and cover must be removed for before installing the rails.
Figure 6-1: Removing the Feet and Chassis Top Cover
Chassis Cover
Chassis Cover Lock
2-6
Chassis Feet