Choose Sound - Philips HTB3280 User Manual

Play files from your PC
Note
•
Before you play multimedia content from the computer,
make sure that the home theater is connected to
the home network, and the media server software is
properly set up.
1
Press (Home).
2
Select [Browse PC], and then press OK.
» A content browser is displayed.
3
Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
• If you cannot see the folders, check
that you have enabled media sharing
on the selected device so that the
content is available for sharing.
4
Select a file, and then press OK.
• Some media files may not play due
to compatibility issues. Check the file
formats supported by your home
theater.
5
Press the play buttons to control play (see
'Play buttons' on page 13).

Choose sound

This section helps you choose the ideal sound
for your video or music.
1
Press .
2
Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound Description
options
[Surround]
Select surround sound or stereo
sound.
[Sound]
Select a sound mode.
[Audio
Delay the audio to match the
sync]
video.
EN
22
Sound Description
options
[Auto
Reduce sudden changes in
volume] volume, for example, during TV
commercials.
3
Select an option, and then press OK.
4
Press to exit.
• If you do not press a button within a
minute, the menu exits automatically.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press .
2
Select [Surround], and then press OK.
3
Press the Navigation buttons (up/down)
to select a setting from your display:
[Auto]: Surround sound based on the
•
audio stream.
[Virtual Surround]: Virtual Surround.
•
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
4
Press OK to confirm.
Sound mode
Select predefined sound modes to suit your
video or music.
1
Make sure that audio post processing is
enabled at the speakers (see 'Speaker
settings' on page 25).
2
Press .
3
Select [Sound], and then press OK.
4
Press the Navigation buttons (up/down)
to select a setting on the display:
• [Auto]: Automatically select a sound
setting based on the sound stream.
[Balanced]: Experience the original
•
sound of your movies and music,
without added sound effects.