ASROCK Z77TM-ITX User Manual page 47

DRAM tRCD
Use this to change RAS# to CAS# Delay (tRCD) Auto/Manual set-
tings. The default is [Auto].
DRAM tRP
Use this to change Row Precharge Time (tRP) Auto/Manual set-
tings. The default is [Auto].
DRAM tRAS
Use this to change RAS# Active Time (tRAS) Auto/Manual settings.
The default is [Auto].
Command Rate (CR)
Use this to change Command Rate (CR) Auto/Manual settings. The
default is [Auto].
DRAM tWR
Use this to change Write Recovery Time (tWR) Auto/Manual set-
tings. The default is [Auto].
DRAM tRFC
Use this to change Refresh Cyle Time (tRFC) Auto/Manual settings.
The default is [Auto].
DRAM tRRD
Use this to change RAS to RAS Delay (tRRD) Auto/Manual set-
tings. The default is [Auto].
DRAM tWTR
Use this to change Write to Read Delay (tWTR) Auto/Manual set-
tings. The default is [Auto].
DRAM tRTP
Use this to change Read to Precharge (tRTP) Auto/Manual settings.
The default is [Auto].
DRAM tFAW
Use this to change Four Activate Window (tFAW) Auto/Manual set-
tings. The default is [Auto].
DRAM tCWL
Use this to change CAS# Write Latency (tCWL) Auto/Manual set-
tings. The default is [Auto].
ODT WR (CHA)
Use this to change ODT (CHA) Auto/Manual settings. The default is
47