Advanced Operations; Fm Radio Receiver; Add Or Cancel Dtmf, 5Tone Signaling - Alinco DJ-500 Instruction Manual

ADVANCED OPERATIONS

FM Radio Receiver

1. In standby state, after pressing
corner, then press
function is on.
2. While "FM ON" is indicated on the display, press
function, FM radio is on when LCD displays "FM ON", FM radio is off when LCD
displays "FM OFF".
3. When FM radio is on, press
meeting stations, scan will stay 5 seconds then resume.
4.Press key to exit FM radio mode.
NOTE: When the radio is on, the Sub-channel receives will turn off. To use FM radio function, user must
set RADIO function on 31th menu to be ON, otherwise can not use FM radio function normally.

Add or Cancel DTMF, 5TONE Signaling

In standby state, press
key, LCD displays "
function. Repeat above operation, LCD still displays "
channel add 5TONE signal decode function. Repeat above operation, "
decode function is cancelled.
NOTE: When this function is on, user must setup 5th menu to be TONE option, then DTMF/5TONE can
be used.
19
key, while
key again, LCD displays "FM" icon and "FM ON", FM radio
key firstly, then press
key, the top left corner of LCD displays "
" icon, it means current channel add DTMF signal decode
T
icon is displayed on the top left
key to turn on/off FM radio
key to scan broadcasting stations,when
" icon, press
" icon, it means current
T
T " icon disappears, optional signal