NEC NP4000 Technical Manual page 11

LAN Function
By connecting a LAN cable to the LAN port (RJ-45), it is possible to transfer screen images from a network PC to
the projector. For a variety of presentations, the projectors can be controlled with a network PC to switch projected
images with a single operation.
it is possible to turn power on and off and switch input signals from a PC via the network. Furthermore the LAN
function allows to control brightness, contrast, volume and picture mute via RJ-45 as well as the operating hours of
the projectors´ lamp and filter.
dust Resistant
Special dust resistant features of the NeC NP4000/4001 projectors – for instance a special coating of the dLP Chip –
increase life expectancy of the projectors and guarantee breathtaking images even in dusty environment etc.
24x7 extended Warranty
The NeC NP4000 and NP4001 allow continuous operation up to 24 hours / 7 days a week.
A special extended warranty for 24 x 7 operations is available for both projectors*.
Stackable
The NP4000 can be double stacked. When using lens model NP08ZL two units can be stacked and reach a maximum brightness of
up to 10,000 ANSi Lumens.
* Consumption parts are not included. Please refer to our warranty conditions under www.nec-display-solutions.com.
11