Hotpoint RLA51 Instructions For Installation & Use page 15

Door Handle Reversal:
11. Remove the hole plugs from the right hand side of the door.
12. Unscrew the handle fixing screws and carefully remove the handle from the
door.
13. Turn the handle vertically, top to bottom and place against the right hand
side.
14. Secure the handle in place with the original fixing screw.
15. Use the hole plugs removed from the right hand side to fill the holes on the
left.
Note : You may require assistance to do this:
16. Replace the top hinge onto the door, slide the door onto the
bottom hinge pin and support the door whilst screwing the
top hinge into position. Ensure that the top hinge bracket is
positioned correctly.
17. Adjust the front feet (see 'Levelling' SAFETY & INSTALLATION
section).
Note : Let the appliance stand upright in it's final location for at least 15
minutes before plugging in and switching on the electricity supply.
Door Reversal
15