Table of Contents
Advertisement
Multi Shot 3D
This TV can create a 3D photo using a pair of photos and save it.
You can only save the image into the SD card.
●
This function is available with photos recorded on digital cameras.
●
Depending on the photos you select, they may not be suitable for creating
●
3D photos, or creating 3D photos may not be possible. In this case, it is
recommended to take a photo (for L) and then move your camera to the
right approx. 5 cm and take another photo (for R).
To view the created 3D photo with 3D effect, you need the 3D Eyewear.
●
1. Display the option menu in the thumbnail view with
2. Select
Multi Shot 3D
3. Select two photos for L (left) and R (right) with
(red)
You can only select photos of the same recording date and the same
●
pixels.
You may not be able to view the created 3D photo properly if you
●
transpose the L and R photos.
4. Create the 3D photo with
If your selected photos are not suitable for the 3D photo, the error
●
message will be displayed and you will return to the photo selection
screen (step 3).
To save the 3D photo in the SD Card, press
●
screen instructions.
After the photo is saved, the photo selection screen will be displayed
●
(step 3). Select photos again to create another 3D photo or exit from
Multi Shot 3D
■
To enjoy the saved 3D photos
Saved 3D photos are displayed in the thumbnail view. Wear the 3D Eyewear
and enjoy the 3D photos.
with
/
and press
OK
mode.
- 121 -
OPTION
OK
to access
/
/
/
and
OK
and follow the on-
Advertisement
Table of Contents
